Generac® RXS200 Transfer Switch

Automatic Home Backup Transfer Switches | RXSW200A3

trucks

Generac® RXS200 Transfer Switch

Automatic Home Backup Transfer Switches | RXSW200A3

  • Generac® 200 amp single-phase service NEMA 3R-rated automatic transfer switch
  • Aluminum NEMA/UL™ Type 3R (indoor-outdoor) enclosure with electrostatically applied and baked powder paint
  • Single-phase, 120/240-volt UL-listed transfer switch

Description

  • Generac Automatic Transfer Switches: Designed for use with single-phase generators that utilize an Evolution™ or Nexus™ Controller. The 100, 200, amp 400 amp open transition switches are available in single-phase in both service equipment rated and non-service equipment rated configurations. The 150 and 300 amp open transition switches are only available in a service rated equipment configuration.
  • Standard Features: Service-rated (RXSW) Generac® Automatic Transfer Switches are housed in an aluminum NEMA/UL™ Type 3R enclosure*, with electrostatically applied and baked powder paint. The Heavy Duty Generac Contactor is a UL-recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
  • *NOTE: Non-service rated (RXSC) switches are housed in a steel enclosure.
  • DPM Technology: Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

Additional Information

Weight: 39 lbs
Dimensions: 13.5 × 6.3 × 30 in

Specs

  • Generac’s 200 amp single-phase service NEMA 3R-rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.
  • Through the use of digital power technology, Generac’s single-phase service rated transfer switch has the ability to manage 4 individual HVAC loads with no additional hardware.
  • Designed for use with single-phase generators that utilize an Evolution or Nexus Controller.
  • Aluminum NEMA/UL Type 3R (indoor-outdoor) enclosure with electrostatically applied and baked powder paint provides additional corrosion protection.
  • Gain even more flexibility when used in tandem with Smart Management Modules.
  • The Smart A/C Module manages the loads by shedding the connected loads in the event of a drop in generator frequency (overload)
  • Single-phase, 120/240-volt; UL-listed transfer switch.
    Best Pick Reports logo
    Home Advisor Screened & Approved logo
    BOCA Chamber serving South Palm Beach County logo
    Generac logo
    Home Depot logo